This British Thread Reducing Adapter is 1/2″ male BSPP by -3 SAE Female thread. This adapter also required the hex to be milled down to 30mm.
Have you ever needed a flare fitting by weld-on? OmegaOne has made a special BHJS-4-SE for a customer who needs to connect their metal hose assembly using an elbow rather than the standard straight weld-on fitting. OmegaOne is able to modify any of our elbow fittings, Flare, Flareless or Pipe […]
This special straight thread connector is a 1/2″ flare tube fitting by 1/2″ British Standard Parallel Port (BSPP) thread. This BSPP fitting was manufactured with a bonded seal. The bonded seal integrates the steel plated retaining washer and the rubber o-ring offering a one piece solution. The TX-8-GC-BSPP has a […]
OmegaOne manufactured this special 1″ BHJS with Class 3 threads and lock wire. United Thread Standards are used to define the machining of threads. The standards cover many different aspects of threaded products, including products OmegaOne manufactures. There are three primary classification categories used. OmegaOne manufactures primarily Class 2 threads […]
OmegaOne is your source for exotic special fittings. We offer the fastest deliveries in the industry. OmegaOne produced a series of special Monel fittings for a customer. This project contained four different configurations, BSPT by JIC, and BHJS-16 Two fitting were manufactured to hold 5,000 PSI at a 4:1 safety […]
A customer approached OmegaOne with a special request. On a standard pipe plug (P-6-HP) the customer required a special tag marked on the head of the plug. Saving the customer the time, cost and effort of tagging the parts themselves OmegaOne provided a solution with parts delivered on time and […]
Face Seal Fittings offer the best seal of all our stainless steel fittings. Our specials department went to work again to help a customer with a difficult to find Face Seal fitting in a 45 degree elbow configuration. This special run was produced in two weeks exceeding the requirements from […]
Recently, OmegaOne manufactured a size 4 and size 6 port thread on a TTF fitting for a customer. Our standard TX-4-TT and TX-6-TTF were adapted to accommodate a port thread rather than the standard pipe thread. Special fitting turned around in 2 weeks!
Rising cost and long delivery caused a customer to approach OmegaOne to help. Our sales and technical group developed a new flare fitting configuration. OmegaOne’s KTX Flare Fitting incorporates a Teflon seal in a groove machined into the nose of the fitting. The result is secondary sealing surface in addition […]
Beginning in 2016, OmegaOne is marking straight fittings with heat codes along with forged fittings which are presently marked with a heat code. Full matching MTR’s are available with these parts. In addition, the OmegaOne logo and material type are marked on the part as well. Material type and company […]