Weld Fittings

Weld Fittings

Butt Weld Hex Male (BHC)

The BHC Hex Male Connector offers a better thread quality than the TOE and offers a wrench hex. The BHC fittings available from OmegaOne are sized 1/4” through 2” and are offered in 304 stainless steel, 316, stainless steel and Carbon Steel.

The BHC is an NPTF thread as specified by SAE J476.

Butt Weld Female (BHFC)

The BHFC Female Connector offers a better thread quality than the TOE and offers a wrench hex. BHFC fittings available from OmegaOne are sized 1/4”,1/2” and 3/4” and are manufactured in 316 stainless steel.

The BHC is an NPTF thread as specified by SAE J476.

Butt Weld Female Swivel JIC (BHJS)

The BHJS Female Swivel Connector JIC offers a JIC swivel fitting as a weld on option alternative to the BHC fitting. OmegaOne offers BHJS fittings from ¼” through 2” and are offered in 316, stainless steel and Carbon Steel.

To reduce prep time, the Carbon Steel BHJS fitting from OmegaOne has a plated swivel nut, and a bare weld end. With no plating on the weld end, the preparation process is saved the time it takes to grind the plating off the weld end before welding. Most BHJS fittings manufactured plate both the nut and the weld end.

The BHJS is an NPTF thread as specified by SAE J541 and SAEJ476 standard.

Thread One End Pipe Fitting (TOE)

The Thread One End Pipe Nipple is a simple weld-on fitting. The most commonly used TOE is manufactured from carbon steel. The TOE fittings sold by OmegaOne are available in schedule 40 and 80 in both carbon steel and stainless steel. The thread is standard NPT pipe thread as specified by ASME B1.2.1.

There are two styles of fitting offered. The standard TOE has the black lacquer coating which must be ground off prior to welding. OmegaOne sells a Weld Prepped TOE with the coating removed with a light coating of a preservative coating for corrosion resistance. This style fitting is also commonly referred to as pickled and oiled.

Metal Hose Slotted End (SE)

Our metal hose Slotted End is designed to attach to metal hose for use as a slip on style attachment. The Slotted End fits over the mating end and is then clamped on and welded. The typical application for a stainless steel Slotted End are exhaust systems and other low pressure uses all suitable for high temperature metal hose. Slotted Ends are light weight and ready to weld out of the box requiring no pre-fabrication preparation.

Slotted Ends are manufactured from 1” ID to 10” ID in 1/8” increments with a + 1/16″ ID tolerance. Standard slot configurations are two or four slot. Custom slot spacing and slot depth are available.

BHC

BHC

BHJS

BHJS

BHJS-20-CS

BHJS-20-CS

BHFC

BHFC