For over 25 years OmegaOne has manufactured stainless steel tube fittings and pipe fittings for use in a variety of hydraulic applications. OmegaOne stainless steel fittings are manufactured following standards defined by SAE J514 and MIL-F-18866. SAE J514 supersedes MIL-F18866, but it is common for the MIL standard to be referenced in the industry due to its legacy of use.
High temperature and high pressure is what stainless steel fittings are designed for. OmegaOne stainless steel tube and pipe fittings are made from316/316L and copper-nickel alloys for maximum corrosion resistance (also known as Cupronickel).
OmegaOne offers a complete line of tube fittings, including flare fittings and flareless fittings. Traditional pipe fittings, SAE straight thread fittings (O-Ring Boss or ORB) and hose-barb, pipe swivel fittings (NPSM) and weld fittings.
Having trouble finding what you need? For 25 years OmegaOne built our reputation on having inventory when nobody else does. With the lowest lead-times are the lowest in the industry we deliver when others cannot.
Have trouble adapting? Need to make something special? OmegaOne has your covered. We are able to adapt to help you in a world that is constantly changing. Our specials department is capable of manufacturing a wide variety of tube and pipe adapter fittings. Extreme size jumps or a change in connection, OmegaOne can help. We are able to help you connect standard flare, flareless fitting and pipe fitting to BSPT and BSPP.
The OmegaOne TX series fitting is a 37 degree Stainless Steel Flare Fittings or JIC (Joint Industry Council) fitting. Flare fittings are used with metal tubing and forms a seal is between the surface of the fitting nose (37 degree flare nose) and the flared tubing. The sleeve is used to evenly distribute the force of the flare nut to the flared end of the tube.
The OmegaOne F series Stainless Steel Flareless Fitting is the single ferrule “bite-type” or compression style fitting. The flareless fitting is a 3-piece design utilizing a flareless nut, sleeve and the fitting body. Flareless fittings have the ability to withstand forces higher than that of the tubing they connect to making them a reliable and commonly used fitting for a variety of applications.
OmegaOne carries an extensive inventory of standard and non-standard stainless steel pipe fittings (P series stainless steel fittings). We carry common sizes and configuration as well as uncommon “jump” sizes. In addition, OmegaOne carries NPSM, stainless steel pipe swivel fittings (PS series pipe fitting) and stainless steel hose barb, “push-on” style fittings (PL Series fittings).
The BHC Hex Male Connector offers a better thread quality than the TOE and offers a wrench hex. The BHC fittings available from OmegaOne are sized 1/4” through 2” and are offered in 304 stainless steel, 316, stainless steel and Carbon Steel.